Specification :

MARSA surge protector are designed to protect single phase and three phase electrical supply system. Installed parallel to incoming power feeder. The range of products can divert up to 80kA surge current per phase ( L-N) , ( L-E) , ( N-E) generated in electrical power line to the earth, Protection is effective in diverting the lightning surge, internally generated and over-charging transient conditions.

FEATURES AND BENEFITS

* Full mode protection with 7 MOV. All mode protection covers Line-Natural ( L-N) , Line-Earth ( L-E) and Neutral-Earth ( N-E) .

* Monoblock protection and each mode protection by single MOV with the same current rating.
* Ensure reliability of surge protector to the facilities and equipment.
* Transient over current protector.
* Double protection unit suitable to extreme lightning condition and frequency.
* With light indicator.

PSP1-20240

* Withstand surge current 20kA per phase ( L-N) , ( L-E) , ( N-E) .
* Designed for single phase power line. Suitable for main Switch Board, Sub Switch and Distribution Board, with incoming cable 35 mm² or less.
* Suitable for electrical, electronic and mechanical equipment ( control system) .

PSP1-40240

* Withstand surge current 40kA per phase ( L-N) , ( L-E) , ( N-E) .
* Designed for single phase power line. Suitable for main Switch Board, Sub Switch and Distribution Board, with incoming cable 95 mm² or less.
* Suitable for electrical, electronic and mechanical equipment ( control system) .

PSP1-20415

* Withstand surge current 20kA per phase ( L-N) , ( L-E) , ( N-E) .
* Designed for three phase power line. Suitable for main Switch Board, Sub Switch and Distribution Board, with incoming cable 35 mm² or less.
* Suitable for electrical, electronic and mechanical equipment ( control system) .

PSP1-40415

* Withstand surge current 40kA per phase ( L-N) , ( L-E) , ( N-E) .
* Designed for three phase power line. Suitable for main Switch Board, Sub Switch and Distribution Board, with incoming cable 95 mm² or less.
* Suitable for electrical, electronic and mechanical equipment ( control system) .

PSP1-80415

* Withstand surge current 80kA per phase ( L-N) , ( L-E) , ( N-E) .
* Designed for three phase power line. Suitable for main Switch Board, Sub Switch and Distribution Board, with incoming cable 95 mm² or more.
* Suitable for electrical, electronic and mechanical equipment ( control system) .

STANDARD OF COMPLIANCE:
* MS IEC 61643-1
* MS IEC 61643-12

Approved By:
* JKR Electrical Material Approved List ( EMAL)

Standard of References:

* IEEE C62.41
* BS 6651

IMPORTANT

* The product is warranted only for manufacturing defects. The warranty period is two years and began on the date of purchased.
* The warranty does not apply to for any misused, altered, neglected or damaged by accident or abnormal conditions of operation or handling.
* Warranty is only valid if the products is purchased through an approved MARSA distributor only.